Brilliant Fires Sensation Slim Powerflue Gas Fire
Maximum heat output 3.3Kw Frame switch (on the side of the fire high up) or wall switch control Coal or Pebble fuel effect Choice of trim & fret for a Traditional look in either Brass, Black or Silver, or for a Contemporary look in Brushed Stainless Steel there is a C3 or C4 sided facia frame with integral ashpan cover, hence a fret is not required Shown opposite with Brass trim, Heatwave Brass fret & Coal fuel effect Open fronted inset fire Suitable for homes without a chimney or flue with an immediate external wall allowing the powerflue to vent horizontally directly through to the outside of the property Natural gas or Propane gas available Minimum depth of 163mm fully inset required or (143mm*) when selecting the frame switch control option

Finishes

Brilliant Black Trim Matt Finish	Brilliant Brass Trim Polished Finish	Brilliant Silver Trim Brushed Finish
Brilliant C3 Frame This option relates to trim design not fuel effect	Brilliant C4 Frame This option relates to trim design not fuel effect

Fuel Effects

Brilliant Coal Advantage, Innovation, Sensation Natural & Lpg Gas

Brilliant Pebble Advantage, Innovation & Sensation Natural Gas Only

Gas Types

Brilliant Natural Gas (NG)

Brilliant Propane Gas (LPG)

Controls

Frets

Fret Not Required	LFL Heatwave Black	LFL Pascal Black
LFL Rose Black	LFL Oak Black	LFL Htwave Chrome
LFL Sentry Black	LFL Pascal Chrome	LFL Heatwave Brass
LFL Oak Black 18	LFL Oak Brass	LFL Oak Antique
LFL Rose Antique	LFL Rose Brass	LFL Sentry Antique
LFL Sentry Brass	LFL Pascal Brass	LFL Oak Antique 18
LFL Oak Brass 18

Please call 0845 301 5552 for a price

Specification

External Dimensions H 616mm W 517mm D 12mm Inset Dimensions H 556mm W 398mm D 163 (143)mm OutPut (NG) Maximum heat output high 3.3Kw low 2Kw Maximum heat input high 6Kw low 4Kw (LPG) Maximum heat output high 3.1Kw low 2.4Kw Maximum heat input high 5.5Kw low 4.8Kw

Details Rear Venting Powerflue Flue No chimney or flue required as this fire is a powered flue gas fire which vents horizontally directly through an immediate external wall. Ventilation An air vent is not normally required

Notes
NOTE: Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment. A powerflue or fanflue is an open fronted gas fire which has an electronically driven fan system mounted on the outside of the wall to expel the flue gases away safely. Although a sound from the fan when in operation is to be expected you may also experience some natural air circulation from the open flue when the fire is not in use which is quite normal. Please note in cases of power failure (power cuts) to your property this fire will not work. The fan electric supply can either be via a 13amp socket or fused switch spur installed by a qualified electrician. The fan on the outside of the wall protrudes by 200mm off the face of the wall and does require a guard to go around the fan unit (NOT SUPPLIED WITHIN THE COST OF THE FIRE, AVAILABLE FROM ALL GOOD LOCAL BUILDERS / PLUMBERS MERCHANTS). When installing the Powerflue you may need to choose a fireplace with a 3" rebate for additional depth dependent on the total amount of depth you have in your cavity wall. Also note that whilst this fire has the option of a wall switch or frame switch the fan is still controlled by a separate manual switch.

For more detailed information about this product visit www.brilliantfires.co.uk. If you would like to view this product before you purchase, please contact Brilliant directly, on 01254 682 384, who will be able to advise you of your nearest dealer.