Drugasar Colour Line Balanced Flue Gas Fire
Maximum heat output 4.4Kw Battery operated remote control as standard Realistic flame effect Glass fronted hole in the wall gas fire Brick effect or Metal interior lining Alu-Metallic or Anthracite finish Comes with Three coloured inserts for the Line, Red, Blue and Anthracite (Shown opposite with Alu-Metallic trim finish, with Red inserts and Log fuel effect Balanced flue gas fire (BF) designed primarily for homes without a chimney or flue with an immediate external wall. However a UK Chimney conversion kit is available (please read the notes section at the bottom of this page for further details about the "Standard Balanced flue kit" & "Chimney Conversion Kit" available at additional cost with this fire) Natural gas only Depth of 382mm fully inset

Finishes

Dru Colour Line Anthracite

Dru Colour Line Alu-Metallic

Hearths and Backs

Drugasar Metal Interior Lining Drugasar

Drugasar Standard Brick Interior Lining Drugasar

Fuel Effects

Drugasar Logs

Gas Types

Natural Gas (NG)

Optional Extras

Please call 0845 301 5552 for a price

Specification

External Dimensions H 840mm W 850mm D 159mm Inset Dimensions H 704mm W 600mm D 223mm OutPut (NG) Maximum heat output high 4.4Kw

Details Modern Glass Fronted Hole In The Wall Gas Fire Flue Balance Flue Fire with Optional Chimney Conversion

Notes
NOTE: Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment Also ensure to study all the relevant information for installation of this appliance by reading the online installation & user instructions provided by Drugasar at www.drugasar.co.uk before proceeding to purchase, as we cannot accept any liability in the event that this product proves to be unsuitable for your needs or circumstances. When installing this product you will also need to to construct a false chimney breast to accept the depth of the fire and line it with non combustable material. The standard balanced flue kit supplied with the fire comes off the top of the fire and raises up 1000mm minimum before venting horizontally at 90 degrees through the external wall. However there is a Chimney conversion kit available for standard 2 storey buildings of normal size & height to enable this fire to operate within an UK style Chimney breast, which consists of 1 short vertical flue / roof terminal, 1 flat or pitched roof tile aluminium plate, 10 metres of flexible 100mm flue pipe, 1 chimney closure plate, 1 flexible 100mm flue adaptor and 1 500mm concentric adjustable flue pipe 150/100 (NOTE: Additional flue pipe & accessories are available prices on request). This appliance comes standard with a temperature display remote control which allows the flame height to vary between high and low from your armchair with a fully automated electronic ignition.
Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. The inside of the glass may also require cleaning from time to time due to condensation that may form on the inside of the glass. Due to the number of size measurements and complexity of this fire it is strongly reccomended that you have the appliance on site / in your possession to take accurate measurements from before proceeding to construct any any false walls or chimney breast to avoid potential mistakes being made. For more detailed information about this product including brochure requests simply click on www.drufire.co.uk