Drugasar Avanto Balanced Flue Gas Fire
Maximum heat output 4.4Kw Up to 77% efficient Battery operated remote control as standard Realistic flame effect Glass fronted Balanced Flued gas fire Choice of either Brick effect or Black Metal interior lining Tapered back so easily installed into corners Choice of Anthracite, Sand Metallic, Alu Metallic or Stainless Steel (shown opposite with Alu Metallic P frame, Black Metal interior lining & Log fuel effect Natural gas or LPG upgrade Depth of 382mm fully inset Options Dru Avanto F Flat trim Dru Avanto P Profile Trim

Finishes

Dru Alu Metallic Drugasar	Dru Anthracite Drugasar	Dru Sand Metallic Drugasar

Hearths and Backs

Dru Standard Brick Lining

Drugasar Metal Interior Lining Drugasar

Fuel Effects

Gas Types

Drugasar Mains Natural Gas (NG)

Drugasar Propane Gas (LPG)

Controls

Drugasar Remote Control With Temperature Display

Optional Extras

Please call 0845 301 5552 for a price

Specification

External Dimensions H 715mm W 653mm D 39/64*mm Inset Dimensions H 596mm W 600mm D 382mm OutPut Maximum heat output high 4.9Kw

Details Contemporary Hang on the wall Balanced Flue Gas Fire Flue No chimney or flue required as this fire is a balanced flue gas fire which vents up vertically then horizontally directly through an external wall. This fire does not require any electrical supply as the remote control is battery operated Ventilation An air vent is not normally required

Notes
NOTE: The delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives at your premises.* Flat trim is 39mm deep while the Profil is 64mm. Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your room and intended location with this fire before making any purchase to avoid disappointment Also ensure to study all the relevant information for installation of this appliance by reading the online installation & user instructions provided by Drugasar at www.drufire.co.uk before proceeding to purchase, as we cannot accept any liability in the event that this product proves to be unsuitable for your needs or circumstances. The standard balanced flue kit supplied with the fire comes off the top of the fire and raises up 1000mm minimum before venting horizontally at 90 degrees through the external wall. This fire also comes standard with an ornamental telescopic flue pipe cover which fits on top of the fire, stands vertically upwards and is designed to meet the ceiling. However this is subject to the overall height of the ceiling in the proposed room of installation as ceiling heights can vary from property to property. Please ensure you check your ceiling height in conjunction with this appliance and it's proposed position on the wall prior to ordering. As we cannot be held responsible if the flue cover and ceiling don't meet. This appliance also comes standard with a temperature display remote control which allows the flame height to vary between high and low from your armchair once the pilot has been ignited manually. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. The inside of the glass may also require cleaning from time to time due to condensation that may form on the inside of the glass. For more detailed information about this product including down loadable technical user & installation instructions, go to www.Drufire.co.uk or alternatively you can email a request for a brochure info@drufire.co.uk