| Bemodern Encore Gas Fire | | |  | | | - Maximum heat output 3.32Kw (48% gross efficiency)
- Choice of manual control as standard with optional extra battery remote control with manual overide available
- Open fronted gas fire
- Optional extra gather hood available when connecting to 5" prefabricated flues or to help minimise heat loss and add extra protection against potential soot / debris falling on to the fire over time
- Natural gas only
- Ultra realistic campfire arrangement with Driftwood fuel effect
- Choice of optional extra trims to suit the Encore gas fire, either Black, Black with Polished Stainless Steel flexa inlay, Brushed Stainless Steel or Brushed Stainless Steel with Polished Stainless Steel flexa inlay(see finish section below)
- Bemodern Encore gas fire shown opposite with Brushed Stainless Steel trim & Polished Stainless Steel flexa - trim inlay, Driftwood fuel effect and optional extra Piero 4 piece marble slip frame in Pearl stone micro marble (not included with the fire as standard, see optional extra's below)
- Depth of 300mm into fireplace opening
| |  |
Finishes
Bemodern Encore All Black Trim
|
Bemodern Encore Brushed Stainless Steel Trim
|
Bemodern Encore Blk Trim & Pol S/S Inlay
|
|
Bemodern Encore S/S Brushed Trim & Pol S/S Inlay
S/S = Stainless Steel |
|
|
Fuel Effects
Gas Types
Natural Gas (NG)
|
|
|
Controls
Manual Rotary Control
|
Bravo & Encore Remote Control
|
|
Optional Extras
No Extras Required
|
Bemodern Bravo & Encore 5 Inch Gather Hood
Picture for illustrative purposes only
|
Bemodern Piero Pearl Micro Marble Frame for Encore
H 953mm x W 1092mm x Depth 25mm
|
|
| | Please call 0845 301 5552 for a price |
Specification | | Inset Dimensions | |
OutPut
Maximum heat output (NG) high 3.32Kw low 1.7Kw
Maximum heat input high 6.9Kw low 3.5Kw 
| | Details
Modern Hole In The Wall Gas Fire Flue
Suitable for class 1 chimneys & class 2, prefabricated** flues | Ventilation | An air vent is not normally required |
|
Notes
NOTE: Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. **Also due to the sheer number of varying flue boxes it is not possible to know which fires are suitable until such time as the existing fire has been removed. Please note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a driftwood fuel effect. Also be aware that due to the fire producing heat the interior backing to the fire may become marked over time through general wear and tear.
For more detailed information about this product or if you would like to view this product before you purchase, simply contact Bemodern directly who will be able to advise you on your nearest dealer www.bemodern.co.uk
|
