Acquisitions X-Fire Widescreen Electric Fire
Modern Hole or Hang on the wall Picture Frame Fire Choice of 3 finishes, either Limestone, Black Granite or Silver Mirror Open fronted electric fire Can Hang on the wall, Semi inset or Fully inset Heat output of either 1kW, 2kW Virtual ribbon flame effect Shown opposite in Silver mirror finish NOTE: Picture / image shown opposite for illustrative purposes only, please see Video below in the Notes Section

Finishes

Acquisitions X-Fires Limestone Finish	Acquisitions X-Fires Granite Finish	Acquisitions X-Fires Mirror Finish

Please call 0845 301 5552 for a price

Specification

Notes

NOTE: This electric product requires a 13amp socket to plug into on installation, This product can easily be installed by a qualified Electrician or competent Builder of Tradesperson. If fully inset do not seal the Frame to the wall, as it may need to be removed during service. It is recommended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating. NOTE: Limestone is a material that has been formed over millions of years and as such is prone to fossils and other natural inclusions that are formed within these materials. These features are of no detriment to the stone and it is what makes this material unique, due to its variety of patterns and natural variations as no two fireplaces are the same. Most Limestone fireplaces will have air pockets on the surface which may be stopped and filled as required. Limestone is generally a robust material although being of a porous stone it is subject to staining from spillages from drinks such as red wine, tea, coffee, marker pens etc. Please therefore avoid placing drinks hot or cold onto the fireplace and always wipe away any spills immediately. Whilst it is strongly reccomended that all Limestone fireplaces be sealed twice a year with a suitable sealant, there is still no guarantee that staining will not occur. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire.

For more detailed information about this product visit www.acquisitions.co.uk. If you would like to view this product before you purchase, please contact Acquisitions directly on 0207 482 2949 or 0845 094 1644 who will be able to advise you on your nearest dealer.