| Bemodern Bravo Gas Fire | | |  | | | - Maximum heat output 3.32Kw (48% gross efficiency)
- Choice of manual control as standard with optional extra battery remote control with manual overide available
- Open fronted gas fire
- Optional extra gather hood available when connecting to 5" prefabricated flues or to help minimise heat loss and add extra protection against potential soot / debris falling on to the fire over time
- Natural gas only
- Ultra realistic campfire arrangement with Driftwood fuel effect
- Choice of optional extra trims to suit the Bravo gas fire, either Black, Black with Polished Stainless Steel flexa inlay, Brushed Stainless Steel or Brushed Stainless Steel with Polished Stainless Steel flexa inlay(see finish section below)
- Bemodern Bravo gas fire shown opposite with Brushed Stainless Steel trim & Polished Stainless Steel flexa - trim inlay, Driftwood fuel effect
- Depth of 300mm into fireplace opening
| |  |
Finishes
Bemodern Bravo All Black Trim
|
Bemodern Bravo Brushed Stainless Steel Trim
|
Bemodern Bravo Blk Trim & Pol S/S Inlay
|
|
Bemodern Bravo S/S Brushed Trim & Pol S/S Inlay
|
|
|
Fuel Effects
Bemodern Bravo/Encore Logs
|
|
|
Gas Types
Natural Gas (NG)
|
|
|
Controls
Manual Rotary Control
|
Bravo & Encore Remote Control
|
|
Optional Extras
No Extras Required
|
Bemodern Bravo & Encore 5 Inch Gather Hood
Picture for illustrative purposes only
|
|
| | Please call 0845 301 5552 for a price |
Specification | | Inset Dimensions | |
OutPut
Maximum heat output (NG) high 3.32Kw low 1.7Kw
Maximum heat input high 6.9Kw low 3.5Kw 
| | Details
Modern Hole In The Wall Gas Fire Flue
Suitable for class 1 chimneys & class 2, prefabricated** flues | Ventilation | An air vent is not normally required |
|
Notes
NOTE: Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. *Also due to the sheer number of varying flue boxes it is not possible to know which fires are suitable until such time as the existing fire has been removed. It is recommended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating. Please be aware that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a pebble, driftwood or light coloured fuel effect. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear. Output depends on flue-pull, diameter of flue and conditions of fireplace. All the above sizes are in millimetres (mm) with all imperial sizes being rounded up to the nearest inch.
For more detailed information about this product visit www.bemodern.com. If you would like to view this product before you purchase, please contact Bemodern directly, on 0191 489 7515, who will be able to advise you on your nearest dealer.
|
