Burley Environ Flueless Gas Fire
Maximum heat output 2.5Kw 100% efficient Realistic Coal fuel effect on all models except for the Environ 4247 version below which comes standard with Pebbles Manual control as standard with optional extra remote control facility Choice of either a plain charcoal / grey fireback on one side (See Environ 4247 version below for image) or brick effect beige fireback on the other (as shown opposite) which can be reversed at time of installation Glass fronted catalytic flueless gas fire Choice of 5 finishes Designed for homes without a chimney or flue Minimum room size of 30m³ required together with additional ventilation of at least 100cm² (air vent included within the cost of this fire) Natural or Liquid Propane gas versions available Cavity wall box also included within the price of this fire as standard Outset Depth of 147mm when inset or 240mm fully outset with optional extra freestanding spacer kit (see details below)

Finishes

Burley Environ 4240	Burley Environ 4242	Burley Environ 4244
Burley Environ 4247	Burley Environ 4248

Gas Types

Burley Natural Gas (NG)

Burley Propane Gas (LPG)

Controls

Manual Control *Image for illustration purposes only

Burley Environ Remote Control

Optional Extras

Please call 0845 301 5552 for a price

Specification

External Dimensions H 612mm W 518mm D 147/240mm Inset Dimensions H 548mm W 385mm D 0/93mm OutPut Maximum heat output high 2.5Kw Maximum heat input high 2.5Kw

Details Contemporary or Traditional Flueless Gas Fire Flue Catalytic flueless gas fire which does not require any chimney or flue Ventilation A minimum 100 cm2 air vent is required

Notes

NOTE: Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment.This Fire should not be installed in a room smaller than 30m^³ with built in ventilation of at least 100cm^² (air vent included with this fire as standard) and an openable window. Also note that this fire cannot be installed in a bathroom or bedroom. If you would like any of the above Environ fires to be completely freestanding you will need to order the optional extra infill product code (INFO141) and spacer kit which fits to the back of the fire. A cavity wall box is also included with this fire for use when recessing part of the fire into the wall. It is recommended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating. Please be aware that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a pebble fuel effect. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire. This can be obtained from Burley themselves

For more detailed information about this product visit www.burley.co.uk. If you would like to view this product before you purchase, please contact Burley directly, on 01572 756 956, who will be able to advise you of your nearest dealer.