| Bemodern Monza Flueless Gas Fire | | |  |  |  | - Maximum heat output 2Kw
- 100% efficient
- Dancing flame effect
- Glass fronted catalytic flueless wall hung gas fire
- Choice of 3 finishes either Limestone as standard, Natural White Marble or Black Granite finish at additional cost (see below)
- Designed for homes without a chimney or flue
- Mounts easily on most internal walls
- Natural gas only
- Maximum projection off the face of the wall of only 159.5mm fully outset
| |  |
Finishes
Bemodern Monza Limestone No image available |
Bemodern Monza Natural White No image available |
Bemodern Monza Black Granite Image as shown above |
 |
Gas Types
Natural Gas (NG)

|
|
|
Controls
Manual Control
 *Image for illustration purposes only |
|
|
 | | Please call 0845 301 5552 for a price |
Specification | External Dimensions | | H | See Table mm | W | See Table mm | D | See Table mm |
|
OutPut Monza & Firenza Maximum heat output high 2Kw
Volante Maximum heat output high 2.6Kw | | Details Contemporary Wall Mounted Flueless Gas Fire Flue Catalytic flueless wall mounted gas fire | Ventilation | 100 cm2 Air vent is required |
|
Notes
|
| Hang On the Wall Flueless Fires |
|
| Name | | Height | Width | Depth |
| Monza |  | 570 | 801 | 159.5 |
| Firenza |  | 770 | 600 | 159.5 |
| Volante |  | 586 | 900 | 186 |
NOTE: Please note that all the above sizes are in millimetres (mm). NOTE: Please ensure to have a survey carried out by a Corgi registered gas installer to check and certify the compatibility of your room with this fire before making any purchase to avoid disappointment. Monza & Firenza This Fire should not be installed in a room smaller than 23m³ with built in ventilation of at least 100cm² and an openable window. Volante This Fire should not be installed in a room smaller than 30m³ with built in ventilation of at least 100cm² and an openable window. Also note that this fire cannot be installed in a bathroom or bedroom. NOTE: This fireplace may be made from small real marble pieces finely crushed and bonded together called micro marble and is only suitable for gas or electric fires and cannot be used with a real solid fuel fire. NOTE: Natural Marble is a natural material and varies in colour, veining and texture which is to be expected. These features are characteristics of marble and must not be considered as defects in anyway. Colour and shade reproduction may also vary from the pictures shown on our website which is part of the beauty that makes each one individual and unique. Marble in its natural form will exhibit variation of formation, veining and colour with inherent natural shakes and fissures. It is accepted practice to fill, reinforce in one way or another and in no way is to be regarded as a defect. Natural marble is subject to change and different veining as no two pieces are exactly the same and therefore cannot be guaranteed as it is a natural product of nature out of the ground, with all associated characteristics and as such must be appreciated accordingly. NOTE: Limestone is a material that has been formed over millions of years and as such is prone to fossils and other natural inclusions that are formed within these materials. These features are of no detriment to the stone and it is what makes this material unique, due to its variety of patterns and natural variations as no two fireplaces are the same. Most Limestone fireplaces will have air pockets on the surface which may be stopped and filled as required. Limestone is generally a robust material although being of a porous stone it is subject to staining from spillages from drinks such as red wine, tea, coffee, marker pens etc. Please therefore avoid placing drinks hot or cold onto the fireplace and always wipe away any spills immediately. Whilst it is strongly recommended that all Limestone fireplaces be sealed twice a year with a suitable sealant (Bemodern Recommend the Bemodern Marble and Stone Care Kit), there is still no guarantee that staining will not occur. It is recommended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating. Clearance Min of 100mm to each side, 800mm to ceiling, 500mm to the front of the fire and at least 60mm from the floor. To help contain this to a minimum, we recommend products receive regular treatments with suitable cleaners and polishes. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire. This can be obtained from Bemodern themselves.
For more detailed information about this product visit www.Bemodern.com. If you would like to view this product before you purchase, please contact Bemodern directly, on 0191 489 7515, who will be able to advise you of your nearest dealer. Or email at sales@fireplacemegastore.co.uk.
|